During material transportation, the conveyor belt may be damaged due to various reasons, such as large pieces of material falling or sharp stones scratching. At this point, repairing and maintaining the conveyor belt becomes particularly important. This article will provide a detailed introduction to the repair methods for conveyor belts.
Repair methods for conveyor belt breakage
There are three main methods for repairing conveyor belt fractures: belt buckle joint method, cold vulcanization joint method, and hot vulcanization joint method. Among these methods, the most cost-effective one is the cold vulcanization joint method. The cold vulcanization joint method is easy to operate, has high joint efficiency, and is cost-effective. More importantly, its joint is firm.
The hot vulcanization joint rule is mainly aimed at manufacturers with thicker conveyor belts. This method requires sufficient space to place the vulcanization machine, using hot vulcanized rubber slurry, unvulcanized core rubber, and unvulcanized surface rubber to be heated and pressurized inside the vulcanization machine. This connection method is the most sturdy, but the construction price is not cheap, so it is necessary to choose whether to use this method based on the specific situation of the conveyor belt.
Repair methods for scratches on conveyor belts
Repairing scratches on the conveyor belt is relatively simple. Firstly, polish the damaged area and then clean the polishing surface with cleaning agent. Next, apply the mixed cold vulcanized adhesive to the damaged area. To ensure wettability and uniformity, it is recommended to apply it twice. Finally, apply the adhesive coated repair strip to the damaged area and press it firmly with a compaction roller.
In short, repairing the conveyor belt is not difficult, the key lies in the operating techniques and materials used.