Conveyor Belt Tool

Hand Rasp
A rasp is a coarse form of file used for coarsely shaping wood or other material. Typically a hand tool, it consists of a generally tapered rectangular, round, or half-round sectioned bar of case hardened steel with distinct, individually cut teeth.
Advantage
The file is used to shape, refine and to smooth out surfaces, the rasp is used to take larger shavings of material off. The rasp is often used to chamfer corners or remove sharp points as well as for rounding and shaping.
Tungsten Carbide Buffing Disc
Tungsten Carbide Buffing Disc is designed for buffing rubber and fabric. Make the surface rougher to increase the bonding effect which the ordinary wire wheels can not match, while avoiding aging process of the buffing surface.
Advantage
If you're looking for wear resistance, then Tungsten Carbide Buffing Disc might be a good bet for your industrial. Wear resistance is how hard it is to remove material by wear.
Porcupine Roller
PORCUPINE ROLLER is a steel roller with a wood handle designed to perforate films to allow air, volatiles, and some resin to flow through the film. The amount of resin flow can be controlled by the depth of the pin penetration. Also useful on foam to give the bonding adhesive a better grip on the foam surface.
Advantage
These spiked rollers are designed to be used on freshly applied floor coatings for the purpose of releasing trapped gas, as well as, to assist in the leveling process of several varieties of floor coatings. These rollers are meant to be used over and over, and they are designed for easy cleaning.
Tyre Regroover
Tyre tread regrooving is a process that begins with removing the rubber from underneath the tread. This means, you can deepen the depth of grooves that was affected by the tyre's mileage. A very important thing – only the tyres that were designed for regrooval can undergo the process.
Advantage
A tyre that has been regrooved will benefit from improved grip immediately. It will increase vehicle performance, and reduce braking distance. The tyre life will also be extended, possibly by many months. Better performance equals better fuel consumption and lowers fuel costs.
Ply Belt Strip Machine
The Products from the hopper passes through a stainless steel feeding system and goes to sealing roller cavities where laminated foils, drawn from two rollers, packs and seals the products in a continuous strip.
Advantage
The parts of these strip packing machines are easily replaceable. By using these automatic strip packaging machines, industries will not only get faster package sealing of products but on the other hand, they can also save a huge amount of labour cost.

Measuring and Squaring
The first step is to ensure that you've turned off the power to the belt and that you're not trying to cut it while it's surrounded by machinery. Safety should always come first and foremost.
Before you make any cuts, it's important that you've properly measured and squared your belt; otherwise, there's every chance a little mistake will damage the longevity of your entire system.
Squaring your cut is extremely important to the belt's integrity, so you may want to use the reliable centerline measuring method to do this. It only takes a few minutes, yet skipping the squaring process can result in an uneven belt and, therefore, unable to properly distribute weight, shortening its lifespan.
The centerline method involves using a measuring tape and a piece of chalk to mark the points on the belt and a square rule to draw a line that's perpendicular to the center of the belt. By measuring the width of the belt and then marking several center points, you can use your square to join your measurements together to get the average centerline.
Using the Right Tools
A box cutter or a utility knife could seem like an affordable cutting option, but they may struggle when cutting a reinforced steel belt. However, this isn't always true, so it's worth checking the specifics of your cutting tools in relation to your particular belt.
Whatever the case, important that you use the right tools to make your cuts as precise as possible. Avoiding fraying and aiming for accuracy is also a must, as even the slightest error may impair the belt's ability to operate to its full capacity.
Your best bet when cutting steel could well be to use a specialized mechanical belt cutting machine. You might want to get a handheld version of a belt cutter if you want a more cost-effective and portable alternative to an upright machine.
Ideally, one cut should be able to do the trick. Multiple cuts may reduce the accuracy of your squaring and result in a poor splice, so try and keep the action to a controlled minimum. Plus, this can also help you minimize cutting times.
Replacement Conveyor Belts
While cutting your belts can be a good way to rejuvenate your conveyor system, investing in a replacement belt may be a better alternative, especially if you need to save time and don't want to compromise the overall quality of your setup.
Replacement conveyor belts are our specialty, so we'd love to help if you're searching for a new solution to your transportation needs – please don't hesitate to reach out to our friendly team for support should you require it.