The quick repair adhesive for conveyor belts is suitable for filling local surface damage, longitudinal tearing of conveyor belts, or V-shaped sealing treatment of roller packaging. Quick repair adhesive for conveyor belts is generally used for repairing rubber layered belts, steel wire conveyor belts, fiber belts, and rubber pipes. Not only does it have a fast repair speed and high repair strength, but it also forms a paste like composite that does not flow and can be applied for repair at any angle.
Damaged and scratched conveyor belt - Quick repair glue repair method for conveyor belt:
1. Place the conveyor belt to be repaired in a horizontal position.
2. Grind the area of the conveyor belt to be repaired in a roundabout manner (it is recommended to use a tungsten steel grinding disc or wire brush), and clean the surface after polishing.
3. Mix the two components of the quick repair adhesive on the conveyor belt and knead evenly (about 2 minutes).
4. Apply an appropriate amount of quick repair glue to the conveyor belt, and then use a scraper to smooth it out. Wait for a few hours until the surface hardens before turning on for use.