After long-term operation, it is inevitable that the conveyor belt will be damaged. We provide professional conveyor belt repair, which does not affect the performance and service life of the conveyor belt, and improves its utilization rate. It is a process specifically designed for repairing local damage, tears, scratches, and other damages to the conveyor belt. The repair of conveyor belts reduces waste and improves the utilization rate of conveyor belts.
Today we will mainly introduce to you the methods commonly used for repairing local damages in conveyor belt repair solutions?
Firstly, the conveyor belt wound is polished by marking the contour of the wound (which should be larger than the damaged area), and then using a professional angle grinder and a tungsten steel polishing disc with moderate grinding degree, the wound area is polished until the surface of the damaged area shows a certain curvature without protrusions. Apply adhesive, clean the polished surface, and then brush the adhesive until it dries until it is slightly sticky but does not adhere to the back of the fingers.
Then, paste the patch, and the wound area should be glued with the patch, avoiding air entrapment as much as possible during the bonding process. Then use a compaction roller to roll the patch from the inside out, compact it, and expel bubbles.