The conveyor belt repair strip is a type of belt repair material used to adhere to the damaged part of the belt or the sealing of the belt joint. Mainly used in cold vulcanization for belt repair or joint treatment, the use of conveyor belt repair strips can greatly save belt repair time, improve construction efficiency, and reduce enterprise costs.
When using conveyor belt repair strips for belt repair, it is necessary to first polish and clean the damaged parts of the belt, apply glue, and then proceed with bonding.
If the wound at the damaged area is light and shallow, the repair strip can be directly attached to the damaged area. If there are pits in the damaged area, it is necessary to polish and clean the damaged area, fill it with rubber repair agent, and then apply glue for pasting. If the damaged area is severely scratched or torn, it needs to be polished and cleaned before attaching repair strips on the upper and lower sides of the damaged area.
After processing, the layered areas need to be polished and cleaned, and then coated with adhesive to stick the repair strip. The repair strip should be attached to the sealing area and placed flat.