The conveyor belt repair strip is a type of belt repair material used to adhere to the damaged part of the belt or the sealing of the belt joint. Mainly used in cold vulcanization for belt repair or joint treatment, the use of conveyor belt repair strips can greatly save belt repair time, improve construction efficiency, and reduce enterprise costs.
The conveyor belt repair strip is divided into reinforced repair strips with fabric layer and ordinary repair strips without fabric layer according to whether it contains a fabric layer. The thickness of the repair strip is generally 2.2mm, 3.2mm, 3.4mm, 3.6mm, 4.6mm, and 4.8mm; The width is generally 100mm, 150mm, 220mm, 300mm, and 400mm; The length is all 10000mm. When using, choose according to the size of the belt wound.
When using conveyor belt repair strips for belt repair, it is necessary to first polish and clean the damaged parts of the belt, apply glue, and then proceed with bonding.
If the wound at the damaged area is light and shallow, the repair strip can be directly attached to the damaged area. If there are potholes in the damaged area, it is necessary to polish and clean the damaged area, fill it with rubber repair agent MC300, and then apply glue for pasting. If the damaged area is severely scratched or torn, it needs to be polished and cleaned before attaching repair strips on the upper and lower sides of the damaged area.