How to use T2 glue gun correctly:
1. The power supply is consistent with the regulations on the T2 glue gun nameplate
2. Before using the T2 glue gun, carefully check all preparatory work (such as power cord, plug, etc.)
3. Be careful of tripping and avoid any danger caused by wires
4. Be careful of burns. When using the T2 glue gun, only hold its handle. When the T2 glue gun is working or cooling, do not touch its front. Remember to wear protective gloves. Remember to wear protective gloves. Remember to wear protective gloves
5. The T2 glue gun must be placed on the insulation device
6. Beware of explosions. When using the T2 glue gun in conjunction with the sol in a closed room, pay attention to the current safety operating procedures to avoid accidents such as explosions.
7. Be careful of injuries caused by rotating parts! Be careful not to touch the feeding port with your hands and fingers.
8. Be careful of the high-speed attraction of the feed inlet worm! When filling the rubber strip, do not keep your hands directly above the feeding port, and do not insert any other objects into the feeding port.
9. Strictly prevent the T2 glue gun from getting damp. Beware of electrical short circuits that can harm people!
10. Immediately replace faulty or damaged parts with original factory parts
Once the T2 glue gun malfunctions, it should be immediately shut down to ensure the safety of the T2 glue gun and promptly troubleshoot.
12. In addition to fully complying with the safety guidelines in this manual, local safety regulations and accident prevention measures must also be strictly followed and implemented.